Hitachi UX2 Series, Instruction Manual

Page: 120 / 300

Chapter 6. Character Print
6-2
This chapter describes the method of printing characters in the actual process.
6.1. Printing Characters
This section describes operation of printing characters.
Lines and message lengths (characters)
Model type 1 line 2 lines 3 lines 4 lines 5 lines 6 lines
UX2-D
Up to 240
characters
x 1 line
Up to 120
characters
x 2 lines
Up to 80
characters
x 3 lines
Up to 60
characters
x 4 lines
Up to 48
characters
x 5 lines
Up to 40
characters
x 6 lines
*) UX2-D Upgrade option: Up to 1,000 characters
● There are no limits on the number of digits which can be input at one print item.
6.1.1. Printing Fixed Characters
(1) Functions
● Inputs characters to be printed.
● The character types that can be input are defined for each dot matrix. Note that there is an inter-
character space appropriate to the character type. (See "5.6.4. Setting Dot Matrix, Inter-character Space,
and Other Parameters".)
● The two input modes are available: [Insert] and [Overwrite].
Insert changes the mode.
● You can specify the start and end of a character string and "copy" and "paste" it to any position.