background image

E-13

How to clean

This nozzle cleans narrow crevices and corners.

For cleaning corners

For cleaning crevice of a sofa

Use by attaching to the inlet of

the handy cleaner.

Inlet

Crevice nozzle

Screw

Handy cleaner

Using the crevice nozzle

Using the extendable multi angle wide brush

Risk of damage.

Do not press against areas that are particularly 
easy to be damaged, such as pianos.

CAUTION

It is an extendable nozzle with a fine tip that can reach far above furniture and into crevices.

Multi angle wide brush

- To remove the multi angle 

wide brush, fully extend the 
extendable multi angle wide 
brush and pull it strongly.

Downward

Upward

The multi angle 
wide brush can 
be attached to 
either side.

Turning the handle changes the orientation of the power head. Then, you can smoothly clean narrow places
such as crevices.

Multi angle head

Rotate

Rotate

Rotate to the left

Rotate to the right

Risk of damage to the floor.

If the brushes, wheels, rotary brush, or roller are worn 

out, please consult with the dealer as soon as possible.

Using the power head while they are worn out may 

damage the floor.

(We recommend replacing the brushes, wheels, rotary 

brush, and roller simultaneously.)

CAUTION

TS_PV-XC500.indd   13

TS_PV-XC500.indd   13

8/7/2015   10:24:42 AM

8/7/2015   10:24:42 AM

Summary of Contents for PV-XC500
































Reviews: