Hitachi PV-XC500 Instruction Manual Download Page 20 | Manualshive

Page: 20 / 31

background image

E-20

Maintenance

Body, attachments, attachment accessories

Filter cover and filters

Fine dust may disperse in the air when performing maintenance.
Empty the dust case in a well-ventilated environment such as outdoors, or wear a mask and avoid breathing in the dust.

●

Perform maintenance (wash with water) on the dust case and filters.

●

To clean with high suction power, we recommend performing frequent maintenance.

Note

Perform maintenance when you are concerned about dirt.
Wring out a soft cloth soaked with water before wiping.

After washing the filters with water, thoroughly air dry them.
About 24 hours is required for the clean filter to dry. (The drying time varies depending on the environment and season.)

Do not use alcohol, cleansers, chemical dustcloths, etc.
They may cause cracks or discoloration.

Note

WARNING

Risk of eruption, fire, electric shock, or injury.

●

Disconnect the plug of the charging station

from the socket when performing charging
station maintenance.

●

Do not use flammable objects,

combustibles (thinner, benzene), etc.

Filter cover, clean filter, sponge filter

When the "indicator lamp flashes in red" or "suction power is weak"

Detach the filter cover and wash
it with water.

→

(P.E-17)

Risk of injury.

You may have unintentionally vacuumed sharp objects such as glass shards or pins.
Be careful when performing maintenance.

●

Detach the clean filter and

wash it with water.

→

(P.E-17)

●

Wash away the dust stuck

deep in the folds of the clean
filter with water.

Drying the clean filter and the sponge filter requires approx. 24 hours.

(The drying time varies depending on the environment and season.)

Wash with water using the maintenance brush.

1

Air dry.

2

Attach in the reverse order of removal.



(P.E-17, E-18)

Attach the filter cover, clean filter, and sponge filter.

3

Sponge

filter

Filter cover

Clean filter

●

Gently press and wash the

sponge filter with water.

CAUTION

Risk of injury.

Discontinue operation when performing body
maintenance.

CAUTION

TS_PV-XC500.indd 20

TS_PV-XC500.indd 20

8/7/2015 10:24:44 AM

8/7/2015 10:24:44 AM

«
...
18
19
20
21
22
...
»

Summary of Contents for PV-XC500
































Reviews:

No comments

Related manuals for PV-XC500

Brand: Xforce Pages: 9

Power4 U90-P4 Series

Brand: Vax Pages: 12

VAPORE 3000 ASPIRA

Brand: VPR Imprex Pages: 11

Brand: Sanitaire Pages: 8

Brand: Hanseatic Pages: 72

Brand: HAPPI Pages: 12

Day Dawning ADH80

Brand: Airthereal Pages: 12

Brand: TCL Pages: 17

Brand: Coway Pages: 24

Brand: Russell Hobbs Pages: 20

Brand: Daewoo Pages: 45

Brand: Perel Pages: 6

Brand: Parkside Pages: 30

Brand: Dirt Devil Pages: 42

Brand: Grundig Pages: 17

Brand: Vax Pages: 8

Brand: Quinetdrive Pages: 4

promax cleardrain 11000

Brand: Oase Pages: 164

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands