Hitachi PV-XC500 Instruction Manual Download Page 30

Page: 30 / 31

E-30

Detaching the battery (when disposing of the product)

Press the control button and confirm that the indicator lamp does not light up.

Use up the battery until the body stops operation completely.

Detach the battery cover.

Fold the handle,



(P.E-3)

and remove the power
head.



(P.E-2)

Remove the two screws
of the battery cover with
the Phillips screwdriver.

Detach the battery cover.

Detach the battery.

Pull out the battery, cut the red lead
wire connecting the battery with the
body in the position approx. 20mm
away from the battery with a nipper,
and insulate it by wrapping it with a
vinyl tape.

Cut the black lead wire in the
position approx. 20mm away
from the battery with a
nipper, and insulate it by
wrapping it with a vinyl tape.

Pull out the hook of the
connector while pressing
it strongly.

WARNING

Risk of fire, electric shock, or injury.

●

When detaching the battery, do not press the control button.

The motor may operate.

●

The lead wires shall be cut one by one separately.

Slowly
rotate.

Battery cover

Handle

Power head

Driver

Screw

Lead wire (red)

Vinyl tape

Battery

Lead wire

Lead wire
(black)

Battery

Connector

Hook

Vinyl tape

Do not cut
the lead
wires of the
connector.

WARNING

Risk of electrical shock or injury.

If the battery is not used up, the motor may operate when detaching the battery.

Disposing of the product

TS_PV-XC500.indd 30

8/7/2015 10:24:46 AM

Summary of Contents for PV-XC500
































Search results

Summary of Contents for PV-XC500

Reviews:

Related manuals for PV-XC500

Brands by name

Popular brands

Hitachi PV-XC500, Instruction Manual

Search results

Summary of Contents for PV-XC500

Reviews:

Related manuals for PV-XC500

Brands by name

Popular brands