E-11
How to operate
Place the power head on the floor, and then press the power head release button to detach the power head.
Remove the body from the charging station,
(P.E-10) and fold
the handle.
(P.E-3)
Rotate the handy brush.
1
3
Rotate the hand brush in the arrow direction holding the sides
of the handy brush and fix it to the tip.
Handy cleaner
Control
button
Detach the power head.
(P.E-2)
2
Press the handy cleaner control button.
4
●
The indicator lamp lights up in green and operation begins.
●
Every time the control button is pressed, operation switches in this loop order: "High" > "Standard" > "Power off".
●
To stop operation, switch to "Power off".
The indicator lamp turns off and operation stops.
CAUTION
Risk of injury or damage.
●
When fixing the handy brush, rotate it holding its sides to prevent your hand from
getting pinched.
●
Do not press against areas that are particularly easy to be damaged, such as pianos.
Risk of damage to the floor.
Do not clean using the tip of the body without the handy brush.
Handy cleaner brush side
Do not subject the handy brush to strong physical shock.
Doing so may detach it from the body.
Note
When the handy brush has come off
Hold the sides of the handy brush and
insert the projected part of the body into
the recessed part of the handy brush.
Projection
Recess
Handy brush side
Use the same procedure when the
opposite side has come off.
TS_PV-XC500.indd 11
TS_PV-XC500.indd 11
8/7/2015 10:24:41 AM
8/7/2015 10:24:41 AM
