E-23
Maintenance
Protective filter
Protective
filter
Remove the protective filter from the body.
Gently press and wash with water.
1
2
●
Tap to remove excess water and air dry it for approx. 12 hours. (The drying time varies depending on the environment and season.)
●
After it dries, attach it to the body.
Protective filter
●
Do not use cleansers or bleach, and do not wash using a washing machine.
Also, do not dry it with hot air such as that from a hair dryer.
It may cause the motor trouble.
●
Remove the attached dust lightly before washing with water.
●
Do not use any other brushes than the attached maintenance brush.
Doing so may cause damage.
●
After washing the filters with water, thoroughly air dry it before attaching it.
Do not use them without drying. Doing so may clog the filters soon and cause poor vacuum or abnormal
odor.
●
Attach the dust case and filters before operation.
If any dust enters the motor, the filter inside the body may be clogged and an abnormal sound may be
generated from the body.
In this case, please consult with the dealer.
●
If the vacuum power is weak even after washing the filters with water, the clean filter, etc. may be worn.
To request for replacement, please consult with the dealer.
Note
TS_PV-XC500.indd 23
TS_PV-XC500.indd 23
8/7/2015 10:24:45 AM
8/7/2015 10:24:45 AM
