Hitachi PV-XC500 Instruction Manual Download Page 24

Page: 24 / 31

E-24

●

Perform maintenance when suction power is weak or when you are concerned about dirt.

●

We recommend periodic maintenance (about once a month).

Dust stuck to the safety switch, rotary brush, roller, brushes, wheels, air inlet, and rotating sections may
cause reductions in suction power or malfunctions.

Power head

CAUTION

Risk of injury.

Detach from the body when performing maintenance.

Crevice nozzle

Rotating sections

Crevice nozzle

Rotary brush

Safety
switch

Wheels

Brushes

Roller

Wheels

Brushes

Wheels

Air inlet

Rotating sections

Shafts

Tweezers

Scissors

Tweezers

Safety switch

Wheels

Rotary brush

Roller

Cut and remove the
dust tangled in the
rotary brush or roller
using scissors, etc.

Remove the dust
tangled in the shaft
using tweezers, etc.

Vacuum attached dust using the crevice nozzle.

Remove tangled dust using tweezers, etc.

Remove attached dust.

Remove tangled dust

Maintenance

CAUTION

Risk of damage to the floor.

●

If dust gets tangled in the wheels, the wheels cannot rotate, which may cause wear and tear and floor damage.

●

If the brushes, wheels, rotary brush, or roller is worn out, please consult with the dealer as soon as possible.

Using the power head while they are worn out may damage the floor. (We recommend replacing the

brushes, wheels, rotary brush, and roller simultaneously.)

Do not subject the safety switch or roller to excessive force. Doing so may cause damage.

Note

TS_PV-XC500.indd 24

8/7/2015 10:24:45 AM

Summary of Contents for PV-XC500
































Search results

Summary of Contents for PV-XC500

Reviews:

Related manuals for PV-XC500

Brands by name

Popular brands

Hitachi PV-XC500, Instruction Manual

Search results

Summary of Contents for PV-XC500

Reviews:

Related manuals for PV-XC500

Brands by name

Popular brands