E-15
Emptying the dust case
●
Do not detach the dust case with the body set down.
Dust may spill.
●
If dust spills inside the body, remove the dust and attach the dust case as it was.
●
Do not turn the dust collection inlet downward when holding the dust case or placing it.
Dust may spill.
●
When you complete cleaning, check whether
the dust exceeds the "Max line".
●
Empty the dust case before exceeding the
"Max line". If the "Max line" is exceeded, the
dust may be difficult to remove from the dust
case.
Max line
Dust
case
Max
Max
Fine dust may disperse in the air when emptying the dust case.
Empty the dust case in a well-ventilated environment such as outdoors, or wear a mask and avoid
breathing in the dust.
Cyclonic cleaners have the advantage of not requiring paper bags,
but to clean with high suction power, we recommend frequent disposal of dust and
filter maintenance.
Check whether the dust in the dust case exceeds the "Max line".
●
When you empty the "dust case", remove dust
from the "clean filter" too.
(P.E-16 to E-18)
●
If dust is wrapped around the inner cylinder filter
and cannot be removed, detach and maintain the
inner cylinder filter.
(P.E-21, E-22)
Max line
Dust
case
Max
Max
Detaching the dust case
Checking the Max line
Note
Note
Hold the dust case and pull the
dust case release button.
1
Pull out the dust case
in the arrow direction.
2
Pull
Dust case
Dust collection
inlet
Dust case
release
button
Pull
How to clean
Emptying the dust case
TS_PV-XC500.indd 15
TS_PV-XC500.indd 15
8/7/2015 10:24:43 AM
8/7/2015 10:24:43 AM