56
P5416904
(3) Operation pattern setting
1. Click on [Pattern name].
2. Select the pattern from 1 to 16.
3. Click on [Change].
4. Enter the Operation pattern name (up to 8 characters).
5. Select the Control content.
6. Click on [OK].
■ When setting multiple Operation patterns, repeat steps 2 to 6.
7. Click on [Done].
②
③
⑦
①
⑤
⑥
④
NOTICE:
●
It is not possible to set the Indoor unit and the Outdoor unit in 1 Operation pattern at the same time.
To modify the setting content, set the content to change after deleting the desired Operation pattern.
● The status of Louver is not indicated in the Operation panel. To check the status of Louver, select [Edit]
after
selecting the Operation.
