P5416904
11
(9) Set the time of the unit.
￭
Common to all OS
1. Input [telnet] and the unit [IP address] in the Command prompt and press [Enter].
Example: telnet 192.168.0.3
Insert a space between [telnet] and [IP Address].
2. Insert [root] and press [Enter].
3. Input [harc] and press [Enter].
The password is not shown.
4. Input in order [date] and actual hour like the following: month, day, hour, minutes, year. Then press [Enter].
Example for 2013 year December 1st 10:05: date 120110052013.
Insert a space between [date] and [month, day, hour, minutes, year].
5. Input [date] and press [Enter].
Check if the time entered has been set correctly.
6. Input [hwclock -w] and press [Enter].
Insert a space between [hwclock] and [-w].
(7) Enable Telnet Client.
■ Windows
®
7
1. Select [Start].
2. Select [Control Panel].
3. Change [View by] on the top right in [Small Icon].
4. Select [Program and Features].
5. Select [Turn Windows features on or off].
6. Check [Telnet Client].
7. Click on [OK].
■ Windows
®
8
1. Indicate the menu on the right side of the screen.
2. Select [Setting].
3. Select [Control Panel].
4. Change [View by] on the top right in [Small Icon].
5. Select [Program and Features].
6. Select [Turn Windows features ON or OFF].
7. Check [Telnet Client].
8. Click on [OK].
(8) Indicate Command prompt.
■ Windows
®
7
1. Select [Start].
2. Select [All Program].
3. Select [Accessory].
4. Select [Command Prompt].
■ Windows
®
8
1. Indicate the menu on the right side of the screen.
2. Select [Search].
3. Enter [Command Prompt] and click on [Enter] on the Keyboard.
4. Select [Command Prompt].
