Hitachi OPTIGEN AP3600 User Manual Download Page 52

Page: 52 / 85

8-6

Utilities Screen

Utilities (Admin)

The Utilities screen provides access to various utilities for setting up the AP3600
system.

Note:

The following utilities are available to users logged in at the Admin level only.

FIGURE 8-7. Utility Screen Admin level

Software Update Utility (Admin)

Software updates should only be performed by qualified personnel. Information for the Software Update Utility is
in the AP3600 Service Manual.

Note:

Screen not shown must be logged in at Admin level.

Panels Update Utility (Admin)

The Panels Update Utility screen allows updates to panels. The updated panels must be located on an USB
memory device and formatted correctly using a spreadsheet.

Note:

Must be logged in at the Admin level.

FIGURE 8-8. Panels Update Utility

Summary of Contents for OPTIGEN AP3600






















































































Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands

Hitachi OPTIGEN AP3600, User Manual

Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands