Hitachi OPTIGEN AP3600 User Manual Download Page 75

Page: 75 / 85

Moving and Installing the System

OPTIGEN® AP3600™ AUTOMATED INSTRUMENT USER MANUAL

Remove bolts to remove fixing plates

4. Remove tape from the inside of the instrument. Remove fixing plates from Nozzle Head by removing bolts. Re-screw bolts into the

tapped holes which were used for the fixing plates.

FIGURE C-4. Removing Fixing Plates

5. If applicable, connect the Laboratory Information System (LIS) network cable (optional) to the Ethernet connector on the monitor.

6. Install the bottle unit attachment connector. See Figure C-5.

7. Install the correct caps with tubing for the Wash Buffer, DI water, and waste bottles. The overflow tubing and bottles should be placed

below the instrument on the waste station tray, because the overflow liquid drains by gravity. All caps are color-coded. See Figure C-5

FIGURE C-5. Install Bottle Connector and Install Bottles Under Instrument

8. Connect the AC power cord to the AP3600 instrument.

9. Close all instrument lids and covers.

10. Press the power switch on the front of the instrument to apply AC power to the instrument.

C-3

Bottle Unit Connector

Bottle Unit Connector on System

Wash Buffer and DI Tubing on System

Wash Buffer, DI Water, and Waste Bottles

Summary of Contents for OPTIGEN AP3600






















































































Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands

Hitachi OPTIGEN AP3600, User Manual

Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands