Hitachi OPTIGEN AP3600 User Manual Download Page 39

Page: 39 / 85

5-9

Set Up & Run Wizard

Running Tests Screen

Once testing has started, the Running Test screen appears (see Figure 5-14). A timer appears that counts down to the testing completion

time.

Note:

Do not turn off the power to the AP3600 at any time during analysis. Doing so will cause loss of patient results. If the run

needs to be canceled during testing, press the

Cancel Run

button at any time.

WARNING: Pettes CANNOT be reused on the AP3600 after a test is canceled.

FIGURE 5-14. Running Tests Screen

Each Pette number is listed on the right. The

Step

column displays the current step. A checkmark appears in the relevant column as the

following checks are complete:

•  S: Serum aspiration verified by CCD camera check
•  A: Antibody aspiration verified by CCD camera check
•  P: Photoreagent aspiration verified by CCD camera check

Note:

For user safety, the right side cover cannot be opened once the run starts. The left side door can be opened after serum

aspiration is complete so the sample vials can be removed and appropriately stored.

Summary of Contents for OPTIGEN AP3600






















































































Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands

Hitachi OPTIGEN AP3600, User Manual

Search results

Summary of Contents for OPTIGEN AP3600

Reviews:

Related manuals for OPTIGEN AP3600

Brands by name

Popular brands