Hitachi FL.NET, User Manual

Page: 45 / 307

3 FL.NET MODULE INSTALLATION
3-4
3.3 Setting the Module Number Selector Switch
When using the FL-net module, it is necessary to perform main module/submodule setup and
communication port setup.
Setup can be completed by pointing the arrow mark on the module number selector switch toward
the desired module number.
Figure 3-2 Setting the Module Number Selector Switch
Table 3-2 shows the meanings of the module number selector switch settings.
Table 3-2 Details of Module Number Selector Switch
MODU No.
Main module Submodule
Meaning of setting
0 1 10BASE5 communication.
2 3 10BASE-T communication.
4 5
6 7
8 9
A B
C D
E F
These module number settings are invalid. When
these settings are selected, the system indicates a
module switch setting error and does not perform
communication or other operations.
When setting a module number, ensure that the power supply is OFF. Setting a
module number with the power supply ON may cause the system to malfunction.
0
8
4
C
F
E
D
3
1
2
5
6
7
9
A
B
Point the arrow
mark toward the
desired number.