Hitachi FL.NET, User Manual

Page: 188 / 307

5 USER GUIDE
5-136
(5) The [Self-node information] window is displayed.
(6) Change the rewrite value and each item of PCs allocation.
After completing the setup, click the OK button (or the Write button if the type of the
controller used is S10V). To cancel the setup, click the Cancel button.
If the FL.NET system is running in online mode, clicking the OK button (or the Write
button if the type of the controller used is S10V) causes the FL.NET module to automatically
isolate itself from the network and write the parameters to the actual target machine. Upon
completion of the writing, the FL.NET module will automatically join the network again
according to the written parameters.
(7) If the FL.NET system is running in online mode, you can also take any of the following actions:
To monitor the current value, click the Start monitoring button.
To display the contents of area 1 and area 2, click the Display node data button.
To join the FL.NET module in the network, click the Enter FL-net button.
To cause the FL.NET module to leave from the network, click the Leave FL-net button.