10
English
CHARGER
Model
UC36YRSL
Charging voltage
14.4 V – 36 V
Weight
0.7 kg
STANDARD ACCESSORIES
CS36DL
LBR
NN
1
Charger (UC36YRSL)
1
–
2
Battery (BSL3620)
1
–
3
Battery cover
1
–
4
Chain case
1
1
5
File set
1
1
6
Oil feeder
2
2
7
Hexagonal bar wrench
1
1
Standard accessories are subject to change without
notice.
APPLICATIONS
○
Cutting of timber/logs
○
Pruning, felling of garden trees
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the housing tightly and push the battery latches to
remove the battery (see
Fig. 4
).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 4
).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to a receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in
Fig. 5, 6
.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the pilot
lamp will blink in red. (At 1-second intervals) (See
Table 1
)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1
, according to the condition of the charger or
the rechargeable battery.
Table 1
Indications of the pilot lamp
The
pilot lamp
lights or
blinks in
red.
Before
charging
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
While
charging
Lights
Lights continuously
Charging
complete
Blinks
Lights for 0.5 seconds. Does not light for 0.5
seconds. (o
ff
for 0.5 seconds)
Charging
impossible Flickers
Lights for 0.1 seconds. Does not light for 0.1
seconds. (o
ff
for 0.1 seconds)
Malfunction in the
battery or the charger
The
pilot lamp
lights in
green.
Overheat
standby
Lights
Lights continuously
Battery overheated.
Unable to charge
(Charging will commence
when battery cools).
(2) Regarding the temperatures of the rechargeable
battery
The temperatures for rechargeable batteries are as
shown in
Table 2
, and batteries that have become hot
should be cooled for a while before being recharged.
Table 2
Recharging ranges of batteries
Rechargeable batteries
Temperatures at
which the battery
can be recharged
BSL3620
0°C – 50°C
(3) Regarding recharging time
Depending on the combination of the charger and
batteries, the charging time will become as shown in
Table 3
.
Table 3
Charging time (At 20°C)
Charger
Battery
UC36YRSL
BSL3620
Approx. 60 min.
NOTE
The charging time may vary according to temperature
and power source voltage.
000Book̲CS36DL.indb 10
000Book̲CS36DL.indb 10
2014/09/11 16:17:17
2014/09/11 16:17:17
