Hitachi CP-A220N Operating Manual Download | Manualshive

Page: 240 / 261

background image

2

First of all

Entries and graphical symbols explanation

The following entries and graphical symbols are used for the manuals and the
product as follows, for safety purpose. Please know their meanings beforehand,
and heed them.

Important safety instruction

The followings are important instructions for safely using the product. Be sure to

follow them always when handling the product. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond normal usage

de



ned in these manuals of this projector.

WARNING

This entry warns of a risk of serious personal injury or even death.

CAUTION

This entry warns of a risk of personal injury or physical damage.

NOTICE

This entry notices of fear of causing trouble.

WARNING

►

Never use the product in or after an abnormality (ex. giving

off smoke, smelling strange, took a liquid or an object inside, broken, etc.) If an
abnormality should occur, unplug the projector urgently.

►

Situate the product away from children and pets.

►

Do not use the product when there is fear of a thunderbolt.

►

Unplug the projector from the power outlet if the projector is not used for the

time being.

►

Do not open or remove any portion of the product, unless the manuals direct

it. For internal maintenance, leave it to your dealer or their service personnel.

►

Use only the accessories speci



ed or recommended by the manufacturer.

►

Do not modify the projector or accessories.

►

Do not let any things or any liquids enter to the inside of the product.

►

Do not wet the product.

►

Do not place the projector where any oils, such as cooking or machine oil, are used.

Oil may harm the product, resulting in malfunction, or falling from the mounted
position.

►

Do not apply a shock or pressure to this product.

- Do not place the product on an unstable place such as the uneven surface or

the leaned table.

- Do not place the product unstably. Place the projector so that it does not

protrude from the surface where the projector is placed on.

- Remove all the attachments including the power cord and cables, from the

projector when carrying the projector.

►

Never look into the projection lens or mirror while the projection lamp lights,

since the projection lamp ray may cause a trouble on your eyes.

►

Do not approach the lamp cover and the exhaust vents, while the projection

lamp is on. Also after the lamp goes out, do not approach them for a while, since
too hot.

«
...
238
239
240
241
242
...
»

Summary of Contents for CP-A220N






































































































































































































































































Reviews:

No comments

Related manuals for CP-A220N

Brand: Da-Lite Pages: 2

Brand: Da-Lite Pages: 8

Brand: Optoma Pages: 2

Brand: Tripp Lite Pages: 2

Brand: Skyline Exhibits Pages: 21

Brand: Intermatic Pages: 2

Brand: BenQ Pages: 2

Brand: Maxell Pages: 77

Brand: Hitachi Pages: 14

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 2

Brand: Hitachi Pages: 2

Brand: Omega Pages: 16

Cine VERSUM 120

Brand: Barco Pages: 43

Brand: Rompa Pages: 9

Brand: Sony Pages: 2

Brand: Sony Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands