Hitachi CP-A220N Page 102 Operating Manual Download

Page: 102 / 261

Maintenance

Cleaning and replacing the air



lter (continued)

Turn the projector on and reset the



lter time using the FILTER TIME item in

the EASY MENU.

►

Before taking care of the air



lter, make sure the power cable

is not plugged in, then allow the projector to cool suf



ciently. Taking care of the

air



lter in a high temperature state of the projector could cause an electric shock,

a burn or malfunction to the projector.

►

Use only the air



lter of the speci



ed type. Do not use the projector without the

air



lter or the



lter cover. It could result in a



re or malfunction to the projector.

►

Clean the air



lter periodically. If the air



lter becomes clogged by dust or the

like, internal temperatures rise and could cause a



re, a burn or malfunction to

the projector.

WARNING

• Please replace the air



lter when it is damaged or heavily soiled.

• When you replace the projection lamp, please replace the air



lter. An air



lter

of speci



ed type will come together with a replacement lamp for this projector.

• Please reset the



lter time only when you have cleaned or replaced the air



lter, for a suitable indication about the air



lter.

• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.

NOTE

(1) Press the

MENU

button to display a menu.

(2) Point at the FILTER TIME using the

▼

▲

button, then press the

►

button.

A dialog will appear.

(3) Press the

►

button to select “OK” on the dialog. It performs resetting the



lter time.

Summary of Contents for CP-A220N






































































































































































































































































Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands

Hitachi CP-A220N, Operating Manual

Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands