Hitachi CP-A220N Operating Manual Download

Page: 157 / 261

2. Network Presentation

2.2 Starting the Network Presentation

This chapter explains the Network Presentation feature with which you can project

computer images transmitted through a network.

The “LiveViewer” allows you to project images from one or multiple computers by

connecting the projector to an existing network without using computer cables.

This Network Presentation feature helps you to smoothly make your presentations

and conduct conferences.

To start the Network Presentation, select the

LAN

port as the input source on the

projector and click the Starting Capture button on the “LiveViewer”.

2.2.1 Display mode

Two display modes, Single PC mode and Multi PC mode, are available for the
Network Presentation.

1) Single PC mode

The projector displays images sent by one computer.

Summary of Contents for CP-A220N






































































































































































































































































Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands

Hitachi CP-A220N, Operating Manual

Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands