Hitachi CP-A220N Page 145 Operating Manual Download

Page: 145 / 261

1.8 Con



rming the connection to your destination (continued)

The projector you want to send your images

to is in the Slideshow mode in the PC-LESS
Presentation.

A Slideshow is currently running on the projector that you are trying to display to.

The projector is not set to the LAN as an

input signal.

Are you sure you want to change the input channel of the Projector to LAN?

• Click

the

[Yes]

, then the projector will stop

the Slideshow and switch the input source

to the

LAN

port.

• Click

the

[No]

, then the projector is

remained in the Slideshow mode, and the
“LiveViewer” main menu is displayed in
stand-by mode on your computer.

• Click

the

[Yes]

, then the projector is

switched to the LAN.

• Click

the

[No]

, then the projector is

remained as it is, and the “LiveViewer”
main menu is displayed in stand-by mode

on your computer.

1. Connection to the network

Summary of Contents for CP-A220N






































































































































































































































































Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands

Hitachi CP-A220N, Operating Manual

Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands