Hitachi CP-A220N Operating Manual Download

Page: 49 / 261

INPUT menu

(continued on next page)

Item

Description

VIDEO FORMAT

The video format for

S-VIDEO

port and

VIDEO

port can be set.

(1) Use the

▲

▼

buttons to

select the input port.

(2) Using the

◄

►

buttons

switches the mode for video

format.

AUTO

NTSC

PAL

SECAM

N-PAL

M-PAL

NTSC4.43

• This item is performed only for a video signal from the

VIDEO

port

or the

S-VIDEO

port.

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well for some signals. If the

picture becomes unstable (e.g. an irregular picture, lack of color),

please select the mode according to the input signal.

HDMI FORMAT

Using the

▲

▼

cursor buttons switches

the video format for an

input from the

HDMI

port.

AUTO

VIDEO

COMPUTER

Feature

AUTO

automatically sets the optimum mode.

VIDEO

sets the suitable mode for DVD signals.

COMPUTER

sets the suitable mode for computer signals.

•

When the COMPUTER is selected, the functions COLOR

(PICTURE menu), TINT (PICTURE menu) and OVER SCAN

(IMAGE menu) are unavailable.

HDMI RANGE

Using the

▲

▼

cursor buttons changes the digital range for input

from the

HDMI

port.

AUTO

NORMAL

ENHANCED

Feature

AUTO

automatically sets the optimum mode.

NORMAL

sets the suitable mode for DVD signals. (16-235)

ENHANCED

sets the suitable mode for computer signals. (0-255)

•

If the contrast of the screen image is too strong or too weak, try



nding a more suitable mode.

Summary of Contents for CP-A220N






































































































































































































































































Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands

Hitachi CP-A220N, Operating Manual

Search results

Summary of Contents for CP-A220N

Reviews:

Related manuals for CP-A220N

Brands by name

Popular brands