49
3.3 Network Settings
Displays and con
gures network settings.
Item
Description
,3&RQ¿JXUDWLRQ
Con
gures network settings.
DHCP ON
Enables DHCP.
DHCP OFF
Disables DHCP.
IP Address
Con
gures the IP address when DHCP is disabled.
Subnet Mask
Con
gures the subnet mask when DHCP is disabled.
Default Gateway
Con
gures the default gateway when DHCP is disabled.
Projector Name
Con
gures the name of the projector.
The length of the Projector Name can be up to 64 alphanumeric
characters. Only alphabets, numbers and following symbols
can be used. !"#$%&'()*+,-./:;<=>?@[\]^_`{|}~ and space.
Particular projector name is pre-assigned by default.
sysLocation (SNMP)
Con
gures the location to be referred to when using SNMP.
The length of the sysLocation can be up to 255 alphanumeric
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
sysContact (SNMP)
Con
gures the contact information to be referred to when
using SNMP.
The length of the sysContact can be up to 255 alphanumeric
characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used.
DNS Server Address
Con
gures the DNS server address.
AMX D.D.
(AMX Device Discovery)
Con
gures the AMX Device Discovery setting to detect the projector
from the controllers of AMX connected to the same network. For the
details of AMX Device Discovery, visit the AMX web site.
URL: http://www.amx.com
• The new con
guration settings are activated after restarting the network connection.
When the con
guration settings are changed, you must restart the network connection. You can
restart the network connection by clicking the
[Network Restart]
on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
NOTE
3. Web Control
Click the
[Apply]
button to save the settings.
