Hisun HS5DUTV-2, Maintenance Handbook

Page: 284 / 355

ELECTRICAL COMPONENTS
- 284 -
CHECKING AND SERVICE OF REVERSE
MECHANISM
1. Check the mobility of gear shift handle. If it is
not working properly, remove the gear shift
Mechanism to check if the fork , ball and spring
is stuck.,in which case replace the defective
component and try again.The last way is to turn
to the professional repairman.
2. If there is lack in the gear shift mechanism ,
adjust the nut of the fork to correct position and
strengthen gear shift mechanism .
3. Remove the gear shift mechanism and check
whether the linking rod is cracked; If so, it
should be changed.
4. Check whether the bouncing spring of gear
shift mechanism is intense enough.
5. Check whether the gear is engaged correctly
and whether there are tripstop or lack. If these
situation exists, call for the maintanance staff to
test and repair it.
6. If the gear can not be engaged, we can test it
from the following aspects:
·whether the clutch can completely declutch;
·whether the gearshift is greased
reliable(whether the oil pipe of gear shift
mechanism is blocked);
· whether gear shift mechanism jams;If these
situation happens, maintanance staff would
come to test and repair it.