Hioki CM3286-50, Instruction Manual

Page: 73 / 118

67
Wireless Communications Function
•
The communication distance is about 10 m with a clear line of sight. The communicable
distance may vary greatly depending on the presence of an obstruction (wall or metallic
shielding object) and the distance between the floor (ground) and instrument. To ensure the
stable communication, make sure that the radio wave intensity is sufficient.
•GENNECT Cross is free of charge. However, the customer is responsible for the cost to
download the application software and connect to the Internet when using the software.
•GENNECT Cross may not operate properly depending on the mobile device.
• The Z3210 uses the 2.4 GHz band wireless technology. When there is a device that uses the
same frequency band such as a wireless LAN (IEEE 802.11.b/g/n) near your mobile device,
the communication may not be established.
•At the time of initial startup (with no device registered), GENNECT Cross starts up with the
Instrument Settings screen.
•When the instrument is nearby, it is automatically connected and registered in the connection
setting screen (up to 8 devices).
•Wait for 5 to 30 seconds for the instrument to be connected and registered after turning on the
power to the instrument. If the instrument is not registered after 1 minute, restart GENNECT
Cross and the instrument.
• When you turn on the instrument for the first time after installing the Z3210, the instrument will
start with the wireless communications function enabled. The setting will be retained even after
power off.
HIOKI CM3286C961-00