Hioki CM3286-50 Instruction Manual Download Page 7

Page: 7 / 118

Introduction

Introduction

Thank you for choosing the Hioki CM3286-50 AC Clamp Power Meter. To ensure your ability

to get the most out of this instrument over the long term, please read this manual carefully and

keep it available for future reference.

Read the separate document “Operating Precautions” carefully before using the instrument.

This clamp power meter provides functionality for measuring AC current, voltage, power, and

frequency as well as for detecting phase.

By connecting the Z3210 Wireless Adapter (option), you can record measurement data from the

instrument and create reports on a mobile device.

Latest instruction manual

The contents of this manual are subject to change, for example as a

result of product improvements or changes to specifications.

The latest edition can be downloaded from Hioki’s website.

https://www.hioki.com/global/support/download

HIOKI CM3286C961-00

Summary of Contents for CM3286-50























































































































Search results

Summary of Contents for CM3286-50

Reviews:

Related manuals for CM3286-50

Brands by name

Popular brands

Hioki CM3286-50, Instruction Manual

Search results

Summary of Contents for CM3286-50

Reviews:

Related manuals for CM3286-50

Brands by name

Popular brands