Hioki CM3286-50, Instruction Manual

Page: 52 / 118

46
Power Measurement (Power, Power Factor)
Measurement display 4 (calculation result)
(3-phase active power)
The measured value is cleared and returns to the initial connection display.
When the active
power is negative, “ − ”
appears beside it. Hold down the key for 1 s or longer.
3-phase active power
Active power 2
Active power 3
Active power 1
Displays
alternately
11
10
• You can switch the information shown on the final measurement display with the Fn key.
See “Switching the information shown on the measurement display” (p. 33)
• If the screen turns red: “Warning display” (p. 106)
HIOKI CM3286C961-00