Hioki BT3564, Instruction Manual, Page: 65 / 210

4.3 Averaging Function
59
4
Chapt
er
4
Appl
ie
d Measur
ement
The Averaging Function averages measurement values for output. This function can minimize instability of
displayed values. The number of samples to average can be set from 2 to 16.
4.3 Averaging Function
1
(The SHIFT indicator lights up.)
The Averaging Function setting display appears.
2
Select
ON
.
3
The number of samples to average setting blinks.
4
Select the number of samples to average.
5
The Average Measurement display appears. (
AVG
lit)
To cancel the settings:
SHIFT
key
(Main display)
(Sub display)
The current setting blinks.
(Sub display)
Or
numeric keypads
Disabling the Averaging Function
1
(The SHIFT indicator lights up.)
The Averaging Function setting display appears.
2
Select
OFF
.
3
The Averaging Function is disabled. (
AVG
not lit)
(Sub display)
When the internal trigger is used for continuous measurement (free-run), the
display shows the moving average. Otherwise, the display shows the integrat-
ing average.
See "4.2 Trigger Function" (

p.57).
HIOKI BT3564A961-02