Hioki BT3564, Instruction Manual, Page: 133 / 210

8.6 Message Reference
127
8
Chapt
er 8
RS-232
C
/GP-I
B
In
te
rf
aces
Set and Query Comparator Judgments
Syntax Command :CALCulate:LIMit:BEEPer
<OFF/HL/IN/BOTH1/BOTH2>
Query :CALCulate:LIMit:BEEPer?
Response <OFF/ HL/ IN/ BOTH1/ BOTH2>
OFF.............No beeps sound.
HL ...............The beeper sounds upon Hi and Lo judgments.
IN ................The beeper sounds upon IN judgments.
BOTH1........The beeper sounds continuously upon IN judgments,
and repeatedly upon Hi and Lo judgments.
BOTH2........The beeper sounds once (briefly) upon IN judgments,
and repeatedly upon Hi and Lo judgments.
Example Command :CALC:LIM:BEEP IN
Query
:CALC:LIM:BEEP?
Response IN
Set and Query the Comparator Mode Setting
(Resistance Measurement)
Syntax Command :CALCulate:LIMit:RESistance:MODE
<HL/ REF>
Query :CALCulate:LIMit:RESistance:MODE?
Response <HL/ REF>
HL ...............Decision by preset upper and lower thresholds.
REF.............Decision by a reference value and tolerance.
Example Command
:CALC:LIM:RES:MODE REF
Query :CALC:LIM:RES:MODE?
Response
REF
(Voltage Measurement)
Syntax Command :CALCulate:LIMit:VOLTage:MODE
<HL/ REF>
Query
:CALCulate:LIMit:VOLTage:MODE?
Response <HL/ REF>
HL ...............Decision by preset upper and lower thresholds.
REF.............Decision by a reference value and tolerance.
HIOKI BT3564A961-02