![background image](http://html.mh-extra.com/html/hilti/ds-ts-5-se/ds-ts-5-se_operating-instructions-manual_2136336024.webp)
24
Operation
3. Diamond saw blades
Range of saw blades / recommendations
We recommend that the specially designed DS-BE saw blades are used with the DS TS 5-SE electric wall saw.
Select the blade to be used, depending on the material being cut, its thickness and steel reinforcement content.
I
Blades of the types RC and BC feature short-tooth design.
I
The information and direction of rotation shown on the sticker must be observed.
Note: The instruction "Max. 1700 r.p.m. 63 m/s according to VBG 49” refers to the applicable standards /
regulations. The recommended speeds for sawing an be found in the table in section 3.2.
I
Flush cutting: Use the special M10 countersunk-head screws for mounting the saw blade.
3.1