21
Operation
Example of an opening with flush cut at bottom with pivoting rail support
2.10
30
17
17
17
12
15
30
17
22
22
0,4
DS-CA5-E carriage
The carriage may be left permanently on the rail.
No.
Designation
쐃
Mark for centering and scale for adjusting the
saw head
쐇
Horizontal bubble level
쐋
Vertical bubble level
쐏
Advance pinion
쐄
Guide rollers for adjustment without play
쐂
Grip opening (transport with rail)
쐆
Saw head mounting guides
���
Cable protector
2.9
2
3
6
1
4
5
7
5
8
Possible rail support positions (all dimensions in cm)
Width of saw cut
Flush cut at bottom
In the example shown, the rail
can be repositioned without
having to detach the wall saw
from it.
1. Run the saw along the rail to
the pivot point.
2. Release the clamping piece
from the rail support at the
other end of the rail.
3. Pivot the rail, with the saw still
attached, into the new position
and fasten it to the previously
installed rail support.
4. Adjust the saw, with blade
fitted, to the cutting line.
DS-RFSI
DS-RFSI
DS-RFSI
DS-RFSI