![background image](http://html.mh-extra.com/html/hilti/ds-ts-5-se/ds-ts-5-se_operating-instructions-manual_2136336020.webp)
20
Operation
DS-ESSI rail end stop
An end stop must always be fitted at each end of the rail.
No.
Designation
쐃
Rail end stop
���
Rail
���
Clamping screw
2.8
DS-RCSI rail connector
Slide the clamping piece into the rail and use the 19 mm
AF open-end wrench to tighten the M12 nut securely.
No.
Designation
쐃
Rail connector
���
Clamps (2)
���
M 12 nut with collar (19 mm AF)
���
Rail 1
���
Rail 2
2.7
4
5
1
3
2
Distance between rail supports, extending the rails
The distance between 2 rail supports must not exceed 170 cm. The rails may be shortened to any desired length,
as required. The cut must be made exactly in the middle of one of the openings for the pinion teeth
. Burrs should
be removed from the cut edge.
2.6
30
30
30
70
230
100
170
6
1
쐇
쐃
���