hilscher netHOST NHST-T100, User Manua

Page: 33 / 75

Device drawings and connectors 33/75
5.3 Protocol logo and LED label sticker
Each netHOST with preloaded firmware is delivered with the appropriate
protocol logo and LED labels already attached to the device. In case of the
NHST-T100-EN device (for which the appropriate firmware has to be
loaded into the device by the customer) label stickers for the supported
master protocols for PROFINET IO, EtherCAT and EtherNet/IP are
included in the delivery package, and can be attached to the device by the
customer:
PROFINET IO EtherCAT EtherNet/IP
Table 21: Sticker for NHST-T100-EN
5.4 Device label
(1) Technical data
(2) Device type name
(3) Part number
(4) Hardware revision number
(5) Serial number
Table 22: Device label (NHST-T100-DP example)
5.5 Power supply connector (X1)
For identification, see position (1) in section Positions of the LEDs,
connectors and control elements [
}
page 31].
The power supply of the netHOST has to be connected to connector X1.
The power supply voltage must be in the range between 18 V and 30 V DC.
Supply voltage Pin Signal Description
Mini Combicon
1 0 V / GND Ground of supply voltage
2 24 V +24 V supply voltage
Table 23: Pin assignment Mini Combicon socket 2-pole
Note:
The power supply plug is included in the delivery. If needed as a
spare part, the plug can be obtained from RIA CONNECT GmbH in
Blumberg, Germany, part number: 31369102-001792.
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public © Hilscher 2013 – 2018