LEDs
61/75
LED state
Definition
Flashing
(1 Hz)
The indicator turns on and off with a frequency of 1 Hz: “on” for 500 ms,
followed by “off” for 500 ms.
Flashing
green/red/
green
The MS LED indicator turns on green on for 250 ms, then red on for 250 ms,
then green on (until the test is completed).
Flashing
green/red/off
The NS LED indicator turns on green on for 250 ms, then red on for 250 ms,
then off (until the test is completed).
Flickering
(load
dependent)
The indicator turns on and off with a frequency of approximately 10 Hz to
indicate high Ethernet activity: on for approximately 50 ms, followed by off
for 50 ms. The indicator turns on and off in irregular intervals to indicate low
Ethernet activity.
Table 47: LED state definitions for the EtherNet/IP Scanner protocol
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
