![Hill-Rom P8000 Service Manual Download Page 416](http://html.mh-extra.com/html/hill-rom/p8000/p8000_service-manual_2134198416.webp)
7.17 Ankle Stirrups (P347AT)
Chapter 7: Accessories
a.
Turn either handle (F) counterclockwise to loosen it, and then turn the
support bar (G) to the applicable angle.
b.
Turn the handle (F) clockwise to tighten it.
c.
Turn the thumb knob (H) counterclockwise to loosen it, and then move
the stirrup weldment (J) to the applicable location along the support
bar (G).
d.
Turn the thumb knob (H) clockwise to tighten it.
e.
If it is necessary to adjust the support bar (G) angle, repeat step a and
step b.
f.
If it is necessary to adjust the stirrup weldment (J) position, repeat step
c and step d.
g.
Repeat step a through step f for the other stirrup.
Page 7 - 28
Hill-Rom® Transport, Procedural, and Specialty Stretchers
Service Manual (144386 REV 2)
Summary of Contents for P8000
Page 2: ......
Page 441: ...Schematic Wiring Diagram Control Board P N 49603 ...
Page 442: ...Schematic Wiring Diagram Electric Stretcher P N 60389 ...
Page 443: ......