Hilberling PT-8000A, Operating Manual

Page: 95 / 122

PT-8000A Appendix A2 v2.00.33 A2-
5
The
Start button is now set to active (black font) and thus the update
program is ready for program transfer
(

continue with chapter A2.8 Get PT-8000A ready to update ).
If in the
Open dialog box no program will be selected (by clicking Cancel ), the
following message will be displayed:
In this case the
Start button remains inactive (grey font).
Using the
Exit button, the update program may be terminated at any
time.
Each PT-8000A CPU is upgraded separately. The file names give clues to the
CPU, as well as the version number:
CPU
File Name Version
MAIN CPU PT8_MAIN_0100.H86 M 01.00
RX CPU PT8_RX_0121.H86 R 01.21
ANT-Tuner CPU PT8_ANT-T_0110.H86 K 01.10
A2.8 Get PT-8000A ready to update
Once the PC is ready for the update, now the PT-8000A needs to be set to the
update standby mode.
1. Pushing MENU button located in the cluster DISPLAY:

The MENU menu will be displayed (see Manual Page 53).
2.
Pushing Soft softkey:
 The SOFTWARE menu will be called up (Fig.
A2-
16).

An overview of the currently loaded software versions will be
shown on display (Fig.
A2-
17).
Fig.
A2-
12
Fig.
A2-
14
Fig.
A2-
15
Fig.
A2-
13
Tab.
A2-
1
No operation program
Terminate update program