PT-8000A Operating Manual v2.00.33
41
VFO menu
active
RX: MAIN-RX
with
selected
VFO A
VFO menu
active
RX: SUB-RX
with
selected
VFO B
In case the MAIN-RX is the active RX and its VFO A is the selected VFO, the
VFO menu is displayed as follows:
The frequency of the
selected
VFO (shown: A) from the
active
RX (shown:
MAIN-RX) will be copied to the
selected
VFO (without identifier) from the RX
in
the background
(shown: SUB-RX).
The frequency of the
selected
VFO (without identifier) from the RX
in the
background
(shown: SUB-RX) will be copied to the
selected
VFO (shown: A)
from the
active
RX (shown: MAIN-RX).
The frequency of the
selected
VFO (shown: A) from the
active
RX (shown:
MAIN-RX) will be copied to the VFO
in standby
(shown: B) from the
active
RX
(shown: MAIN-RX).
VFO SPLIT: The Frequency of the
selected
VFO (shown VFO A) from the
active
MAIN-RX will be used for RX; the
selected
VFO (without identifier) from the
SUB-RX
in the background
will determine the TX frequency (see also P. 42); to
the left of the Display
SPLIT
will be displayed; the softkey will be displayed
inverse.
Softkey STEP
(towards fine tuning) decreases the tuning increments by
power of 10. Additional digits appear at the VFO frequency readout.
Softkey STEP
(towards coarse tuning) increases the tuning increments by
power of 10. Lesser digits appear at the VFO frequency readout.
SPLIT operation using VFO A and VFO B (=
VFO SPLIT
) is only possible with
the MAIN-RX (the
active
RX. SUB-RX is
in the background
).
In case the SUB-RX is the
active
RX and its VFO B is the
selected
VFO, the VFO
menu is displayed as follows:
The frequency of the
selected
VFO (shown: B) from the
active
RX (shown: SUB-
RX) will be copied to the
selected
VFO (without identifier) from the RX
in the
background
(shown: MAIN-RX).
The frequency of the
selected
VFO (without identifier) from the RX
in the
background
(shown: MAIN-RX) will be copied to the
selected
VFO (shown: B)
from the
active
RX (shown: SUB-RX).
The frequency of the
selected
VFO (shown: B) from the
active
RX (shown: SUB-
RX) will be copied to the VFO
in standby
(shown: A) from the
active
RX (shown:
SUB-RX).
VFO SPLIT is not applicable if SUB-RX is the
active
one; for SPLIT operation the
MAIN-RX must be
active
, see above.
Softkey STEP
(towards fine tuning) decreases the tuning increments by
power of 10. Additional digits appear at the VFO frequency readout.
Softkey STEP
(towards coarse tuning) increases the tuning increments by
power of 10. Lesser digits appear at the VFO frequency readout.
Fig. 52
Fig. 53
Example
Example
Summary of Contents for PT-8000A
