Hilberling PT-8000A, Operating Manual

Page: 51 / 122

PT-8000A Operating Manual v2.00.33
43
RIT/XIT menu / RIT/XIT offset
Fig. 55
11.8 RIT / XIT Operation
RIT (Receiver Incremental Tuning) allows to shift/adjust the receiving frequency
plus/minus 9.999 kHz against the transmit frequency. The MAIN-RX and the
transmitter are no longer „transceive“. RIT is only possible with the MAIN-RX.
XIT (Transmitter Incremental Tuning) allows to shift/adjust the transmitting
frequency plus/minus 9.999 kHz against the receiving frequency. The MAIN-RX
and the transmitter are no longer „transceive“. RIT is only possible with the
MAIN-RX.
When pushing RIT/XIT button located in the cluster VFO:

RIT/XIT LED will be on.
 RIT/XIT menu will be called up. RIT or XIT will be displayed inverse (after
power-on RIT will be activated = power-on default).

CLAR knob will be activated (functions see below, Fig. 56).
 RIT or XIT and the offset frequency will be displayed right next to the
frequency (after power-on RIT will be activated; the offset frequency will be
set to 0.000 kHz = power-on default).
In case of RIT is activated, the display will show the RX frequency affected by
offset frequency (= resulting frequency). When TX operation during XIT
activation, the display will show the TX frequency affected by offset frequency
(= resulting frequency).
Activation RIT (as shown here)
Activation XIT
Reset the offset to zero
 Turning the knob CLAR (clarifier) located right next to the cluster VFO will
adjust the offset frequency.

Pushing the knob CLAR will toggle the offset frequency between selected
value and 0.000 kHz.
oder
RIT: Resulting RX Frequency when receiving
XIT: Resulting TX Frequency when transmitting
Offset Frequency
RIT / XIT
Status
RIT or XIT
Fig. 54
Fig. 56