Hilberling PT-8000A, Operating Manual

Page: 40 / 122

32
ENTER menu
11.2 Numerical Frequency Input ENTER
Pushing ENTER button located in the cluster MODE will call up the ENTER
menu and will activate the numerical frequency input:
 The frequency display will show blanks for all digits. A cursor indicates
(„_“) which digit can be edited.
The number of blanks/digits are shown depends on the resolution selected by
using the Softkeys STEP  , STEP

or STEP VFO (s. P. 41). E.g. the
resolution is 1 kHz the frequency will be displayed as follows:

Pushing the respective numbers from 1.8 1 to 28 9 allocated to the
BAND buttons (located in the cluster BAND) and 0 VHF (located in the
cluster MODE) will insert the digits from left to right.

Pushing ENTER button (located in the cluster MODE or softkey) again will
complete the input; the RX transfers the frequency; the VFO menu will be
displayed:
Numerical input will be aborted;
the last used frequency will be displayed instead;
the last used softkey menu will be called up.
The curser will jump to the next left position; the last digit input will be deleted;
a leading empty digit will reappear.
Frequency input will be completed;
the RX transfers the frequency (function the same as ENTER key in the cluster
MODE);the VFO softkey menu will be displayed.
Fig. 37a
Fig. 38
MHz kHz Hz
MHz kHz
Fig. 37b
Can not be
edited
Fig. 36