PT-8000A Appendix A2 v2.00.33
A2-
1
A2
F
I R M W AR E
U
P D AT E AN D
U
P D AT E
S
O F T W AR E
A2.1
Preliminary Note
This appendix describes how to update the operation software of your PT-8000A transceiver (= firmware
update).
Please note
: Update of the PT-8000A operation software needs basic knowledge in handling a Windows
®
computer. If you are unsure to install and set-up programs on your computer please look for help in your
personal environment or get in touch directly to your dealer or Hilberling GmbH.
A2.2
Introduction
The PT-8000A is controlled by 5 microprocessors. Therefore, a plurality of functions is defined by software.
This has clear advantages: The insertion of new features and changes in performances are possible as well
as the realization of special needs, especially for commercial applications. The update is done with a PC /
laptop (hereafter referred only to the PC) running the operating system Microsoft Windows
®
.
A2.3
Requirements and Procedure
To update the PT-8000A operation programs (= firmware) are required:
1.
Windows computer featuring:
Windows XP/Vista/7
®
(Administrator rights are required!)
12 MB free memory space on hard disk drive
USB connector
2.
Update program (will be installed on PC).
3.
PT-8000A operation program (firmware) in the latest version (will be transferred by the update
program to the PT-8000A); updatable is the firmware of the following microprocessors (CPUs):
MAIN-CPU
RX-CPU
ANT-Tuner-CPU
4.
USB data cable (USB-A
⬄
USB-B, see Operating Manual Page 10 / Fig. 12)
For the entire update procedure, we recommend the following execution, which is also reflected in the
following chapter sequence:
Preparation:
A2.4 Download the operation program(s) / the update program from the Internet
A2.5 Install the update program
A2.6 Connect the PT-8000A to the PC by USB data cable
Execution:
A2.7 Start and setup the update program
A2.8 Get PT-8000A ready to update
A2.9 Update of the MAIN-CPU
or
A2.10 Update of the RX- and the ANT-Tuner-CPU
Summary of Contents for PT-8000A
