Hilberling PT-8000A, Operating Manual

Page: 52 / 122

44
The tuning range of RIT/XIT amounts to ±9.999 kHz.
The tuning increments of the CLAR control is identical to the selected STEP rate
for frequency tuning of selected VFO.
RIT/XIT are not available for SUB-RX.
In case the SUB-RX is the
active one (pushbutton MAIN/SUB) RIT/XIT and the
offset are no longer displayed for the MAIN-RX which now operates in
background .
Changing MODE will always terminate RIT/XIT operation.
If the RIT/XIT softkey menu is displayed, pushing RIT/XIT will terminate this
modus and the VFO menu will be called up.
If the RIT/XIT softkey menu is not displayed, pushing RIT/XIT will call it up and
a second push will terminate RIT/XIT operation:
 VFO menu will be called up.

RIT/XIT-LED will turn off.
 Display of RIT / XIT and the offset frequency will be blanked out.
11.9 Locking VFO Settings LOCK
All controls that will have an effect on the frequency selected can be locked
through pushing LOCK button which is located in the cluster VFO.
When pushing LOCK:
 LOCK LED will be on.

The following controls (knobs, buttons) are locked:

MAIN-RX VFO

SUB-RX VFO

STEP-VFO
 BAND

CHANNEL / MEM
 RIT / XIT

MAIN / SUB

VFO A / B
Pushing LOCK again will terminate locking of controls; LED will turn off.
Termination of
RIT/XIT Operation
Fig. 57