Network Camera User Manual
UM Network Camera User Manual 071421NA
99
3.
Click
Add Region
to draw the detection area and set
Region Name
and
Alarm Interval
. Repeat this step
above to set more areas.
•
Alarm Interval
: During the set alarm interval, alarms of the same type trigger only one notification.
Figure 13, Set Waiting Time Detection
4.
Set
Alarm threshold
. An alarm is triggered when the alarm threshold condition is met.
5.
For arming schedule settings, refer to
Set Arming Schedule. For linkage method settings, refer to
Linkage Method Settings.
6.
Click
Save
.
7.
Optional: Enable Display POS Information and Rule in Configuration
→
Local.
The detection area and the time people staying in the detection area can be viewed on the live view.
10.5.3
Queue Management Statistics
Queue management supports data analysis and report output.
Before You Start
For queue management settings, refer to
Set Regional People Queuing-Up and Set Waiting Time Detection.
•
Select
Queuing-Up Time Analysis
and
Regional Comparison
to compare queuing-up people number of
different regions.
•
Select
Queuing-Up Time Analysis
and
Multi-Level Comparison
to compare queuing-up people number
of different waiting time levels.
•
Select
Queue Status Analysis
and
Regional Comparison
to compare the time and duration that a queue
stays at a certain length in different regions.
•
Select
Queue Status Analysis
and
Multi-Level Comparison
to compare the time and duration of the
queue at different queue length levels.
Summary of Contents for IDS-2CD7546G0-IZHSY 8-32 MM
Page 1: ...Network Camera User Manual...
Page 112: ......