HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 47 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 47
3. Set the corresponding parameters.
Alarm Detection Interval
The time interval to detect the exception.
Sensitivity
The higher the value, the more easily the exception will be detected, and the higher the possibility of
misinformation.
Alarm Delay Times
The device uploads the alarm when the alarm reaches the set number of times.
1. Check
Enable
, and the selected diagnosis type will be detected.
2. Set arming schedule. See
Set Arming Schedule.
3. Set linkage method. See
Linkage Method Settings.
4. Click
Save
.
NOTE: The function is supported only by certain models. The actual display varies by model.
6.1.9 Set Vibration Detection
Detects if the device is vibrating. The device reports an alarm and triggers linkage actions if the function
is enabled.
Steps
1. Go to Configuration → Event → Basic Event → Vibration Detection.
2. Check
Enable
.
3. Drag the slider to set the detection sensitivity. You can also enter a number to set the sensitivity.
4. Set the arming schedule. See
Set Arming Schedule.
5. Set the linkage method. See
Linkage Method Settings.
6. Click
Save
.
NOTE: The function is supported only by certain models. The actual display varies by model.
6.2 Smart Event
NOTE:
For certain device models, you need to enable the smart event function on the
VCA
Resource page first to show the function configuration page.
The function varies by model.