HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 38 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 38
Steps
1. Go to
Configuration → Storage → Schedule Settings → Record Schedule
.
2. Check Enable .
3. Select a record type.
NOTE:
The record type varies by model.
•
Continuous : The video will be recorded continuously according to the schedule.
• Motion
: When motion detection is enabled and trigger recording is selected as the linkage method,
object movement is recorded.
• Alarm
: When alarm input is enabled and trigger recording is selected as the linkage method, the
video is recorded after receiving an alarm signal from an external alarm input device.
• Motion | Alarm
: Video is recorded when motion is detected or an alarm signal is received from the
external alarm input device.
•
Motion & Alarm : Video is recorded only when motion is detected and an alarm signal is received
from an external alarm input device.
• Event : The video is recorded when a configured event is detected.
4. Set schedule for the selected record type. Refer to
Set Arming Schedule for the setting operation.
5. Click Advanced to set the advanced settings.
• Overwrite
: Enable
Overwrite
to overwrite the video records when the storage space is full.
Otherwise, the camera cannot record new videos.
• Pre-record : The time period set to record before the scheduled time.
• Post-record
: The time period set to stop recording after the scheduled time.
• Stream Type : Select the stream type for recording.
NOTE:
When you select a stream type with higher bitrate, the actual time of the pre-record
and post-record may be less than the set value.
• Recording Expiration
: The recordings are deleted when they exceed the expired time. The expired
time is configurable. Note that once the recordings are deleted, they can not be recovered.
6. Click Save .
5.2.2 Record Manually
Steps
1. Go to Configuration → Local.