HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 66 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 66
7.10 Set Network Service
You can control the ON/OFF status of certain protocols as desired.
Steps
NOTE:
This function varies by model.
Go to
Configuration → Network → Advanced Settings → Network Service
.
1. Set network service.
• WebSocket & WebSockets
: WebSocket or WebSockets protocol should be enabled if you use
Google Chrome 57 or above version or Mozilla Firefox 52 or above version to visit the device.
Otherwise, live view, image capture, and the digital zoom function cannot be used.
­
If the device uses HTTP, enable WebSocket.
­
If the device uses HTTPS, enable WebSockets and select the server certificate.
• SDK Service & Enhanced SDK Service
: Check
Enable SDK Service
to add the device to the client
software with SDK protocol. Check Enable Enhanced SDK Service to add the device to the client
software with SDK over TLS protocol.
NOTE:
If you enable Enhanced SDK Service, you should select the server certificate.
When set up a connection between the device and the client software, it is
recommended to use Enhanced SDK Service and set the communication in Arming
Mode to encrypt the data transmission.
•
TLS (Transport Layer Security): The device offers TLS1.1 and TLS1.2. Enable one or more protocol
versions according to your need.
2. Click
Save
.
7.11 Set ONVIF
If you need to access the device through ONVIF protocol, you can configure the ONVIF user to enhance the
network security.
Steps
1. Go to Configuration → Network → Advanced Settings → Integration Protocol.
2. Check Enable ONVIF.
3. Click Add to configure the ONVIF user.
• Delete:
Delete the selected ONVIF user.
• Modify: Modify the selected ONVIF user.