Network Camera User Manual
UM Network Camera User Manual 071421NA
98
Before You Start
To enable the function, go to
VCA Resource
, and select
Queue Management
.
Steps
1.
Go to Configuration
→
Queue Management.
2.
Select Regional People Queuing-Up.
3.
Click
Add Region
to draw the detection area and set
Region Name
and
Alarm Interval
. Repeat this step
above to set more areas.
•
Alarm Interval
: During the set alarm interval, alarms of the same type only trigger one notification.
Figure 12, Set Regional People Queuing-Up
4.
Optional: Check
OSD
to display the region name and its real-time queuing-up people number.
5.
Set
Alarm threshold
. An alarm is triggered when the alarm threshold condition is met.
6.
For arming schedule settings, refer to
Set Arming Schedule. For linkage method settings, refer to
Linkage Method Settings.
7.
Click
Save
.
10.5.2
Set Waiting Time Detection
Counts the waiting time of each person that enters the detection area. Alarms are triggered when the
alarm threshold condition and the alarm trigger are both met.
Before You Start
To enable the function, go to
VCA Resource
, and select
Queue Management
.
Steps
1.
Go to Configuration
→
Queue Management.
2.
Select Waiting Time Detection.
Summary of Contents for IDS-2CD7546G0-IZHSY 8-32 MM
Page 1: ...Network Camera User Manual...
Page 112: ......