HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 49 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 49
6.2.3 Detect Scene Change
Scene Change Detection detects change in the surveillance scene. Certain actions can be taken when an
alarm is triggered.
Steps
1. Go to Configuration
→
Event
→
Smart Event
→
Scene Change Detection.
2. Click
Enable
.
3. Set the Sensitivity . The higher the value, the more easily the change of scene will be detected, but
detection accuracy is reduced.
4. Refer to Set Arming Schedule for setting scheduled time. Refer to Linkage Method Settings for setting
linkage method.
5. Click
Save
.
NOTE: The function varies by model.
6.2.4 Set Face Detection
Detects faces in the detection region. If a face is detected, the device triggers the linkage actions.
Steps
1. Go to Configuration → Event → Smart Event → Face Detection.
2. Check Enable Face Detection.
3. Optional: Highlight to display the face in the image.
4. Check Enable Dynamic Analysis For Face Detection.
1) Go to
Configuration → Local
, set
Rules
to
Enable
.
5. Set Sensitivity . The lower the sensitivity, the face profile or an unclear face is more difficult to detect.
6. Set the arming schedule and linkage methods. For information about arming schedule settings, see
Set Arming Schedule. For information about linkage methods, see Linkage Method Settings.
7. Click Save .
6.2.5 Set Video Loss
This function can detect video signal loss in time and trigger the linkage action.
Steps
1. Go to Configuration → Event → Basic Event → Video Loss.
2. Check
Enable
.