Network Camera User Manual
UM Network Camera User Manual 071421NA
87
Chapter 10 Allocate VCA Resource
VCA resource offers you options to enable certain VCA functions according to actual needs. It helps
allocate more resources to the desired functions.
Steps
1.
Go to Configuration
→
System
→
System Settings
→
VCA Resource.
2.
Select desired VCA function.
3.
Save the settings.
NOTE:
Some VCA functions are mutually exclusive. When certain function or functions are
selected and saved, others will not be hidden.
10.1
Face Capture
The device can capture a face that appears in the configured area, and the face information will be
uploaded with the captured picture as well.
NOTE:
For device that supports face capture, you need to enable the function in
VCA
Resource
. Refer to
Allocate VCA Resource for details.
Face capture is supported only by certain models.
10.1.1
Set Face Capture
A face that appears in the configured area can be captured.
Before You Start
To enable the function, go to
VCA Resource
and select
Face Capture
.
Steps
1.
Go to Configuration
→
Face Capture.
2.
For shield region settings, refer to
Set Shield Region.
3.
Select
Rule
and check
Rule
.
4.
Click to draw the detection area. It is recommended that the drawn area occupies 1/2 to 2/3 of the
live view image.
5.
Click and draw a rectangle based on the pupil distance of the face on the live view.
Summary of Contents for IDS-2CD7546G0-IZHSY 8-32 MM
Page 1: ...Network Camera User Manual...
Page 112: ......