Network Camera User Manual
UM Network Camera User Manual 071421NA
68
•
https://appstore.hikvision.com/, and click
Installation Help
at the upper right corner of the
interface to refer to the troubleshooting.
3.
Start the application and register for a Hik-Connect user account.
4.
Log in after registration.
5.
In the app, tap “+” on the upper-right corner and then scan the QR code of the camera to add the
camera. You can find the QR code on the camera or on the cover of the Quick Start Guide of the camera
in the package.
6.
Follow the prompts to set the network connection, and add the camera to your Hik-Connect account.
NOTE:
For detailed information, refer to the Hik-Connect app user manual.
7.13.1
Enable Hik-Connect Service on Camera
Hik-Connect service should be enabled on your camera before using the service. You can enable the
service through SADP software or a Web browser.
Enable Hik-Connect Service via Web Browser
Follow the following steps to enable Hik-Connect service via a Web Browser.
Before You Start
Activate the camera before enabling the service.
Steps
1.
Access the camera via a Web browser.
2.
Enter platform access configuration interface. Configuration
→
Network
→
Advanced Settings
→
Platform Access.
3.
Select Hik-Connect as the Platform Access Mode.
4.
Check
Enable
.
5.
Click and read “Terms of Service” and “Privacy Policy” in pop-up window.
6.
Create a verification code or change the old verification code for the camera.
NOTE:
The verification code is required when you add the camera to Hik-Connect service.
7.
Save the settings.
Enable Hik-Connect Service via SADP Software
This section introduces how to enable Hik-Connect service via SADP software of an activated camera.
Steps
1.
Run SADP software.
2.
Select a camera and enter
Modify Network Parameters
page.
Summary of Contents for IDS-2CD7546G0-IZHSY 8-32 MM
Page 1: ...Network Camera User Manual...
Page 112: ......