Network Camera User Manual
UM Network Camera User Manual 071421NA
52
7.
For the arming schedule settings, refer to
Set Arming Schedule. For the linkage method settings, refer
to
Linkage Method Settings.
8.
Click
Save
.
6.2.8
Set Region Entrance Detection
Detects objects entering a pre-defined virtual region. If it occurs, the device can take linkage actions.
Steps
1.
Go to Configuration
→
Event
→
Smart Event
→
Region Entrance Detection.
2.
Check
Enable
.
3.
Select one
Region
. For the region settings, refer to
Draw Area.
4.
Select the detection target. Human and vehicle are available. If the detection target is not selected, all
the detected targets will be reported, including humans and vehicles.
Figure 6, Set Rule
5.
Optional: You can set the parameters of multiple areas by repeating the above steps.
6.
For the arming schedule settings, refer to
Set Arming Schedule. For the linkage method settings, refer
to
Linkage Method Settings.
7.
Click
Save
.
6.2.9
Set Region Exiting Detection
Detect objects exiting from a pre-defined virtual region. If it occurs, the device can take linkage actions.
Steps
1.
Go to Configuration
→
Event
→
Smart Event
→
Region Exiting Detection.
2.
Check
Enable
.
Summary of Contents for IDS-2CD7546G0-IZHSY 8-32 MM
Page 1: ...Network Camera User Manual...
Page 112: ......