HIKVISION IDS-2CD7546G0-IZHSY 8-32 MM, User Manual, Page: 39 / 112

Network Camera User Manual
UM Network Camera User Manual 071421NA 39
2. Set the Record File Size and saving path to for recorded files.
3. Click
Save
.
4. Click to start recording. Click to stop recording.
5.2.3 Set Lite Storage
After lite storage is enabled, the frame rate and bitrate of the video stream can be reduced to lengthen
the storage time of the memory card when there is no moving object in the monitoring scenario.
Steps
1. Go to Configuration → Storage → Storage Management → Lite Storage.
2. Check Enable and set the level. The higher the level, the larger the frame rate and bitrate, and the
shorter the recommended storage time.
3. Set the storage time. The device automatically calculates the bitrate and offers the recommended
storage time according to the memory card space and level. You are recommended to set the storage
time to the device recommended time.
NOTE: If lite storage is enabled, an unformatted memory card will be formatted
automatically.
The displayed available space of the memory card is assigned by default according
to
Percentage of Record
in
Storage
→
Storage Management
→
Quota
. You can adjust it
as required.
Only certain device models support this function.
5.2.4 Playback and Download Video
You can search, play back, and download the videos stored in the local storage or network storage.
Steps
1. Click Playback.
2. Set search condition and click
Search
.
The matched video files showe on the timing bar.
3. Click to play the video files.
•
Click to clip video files.
•
Click to play video files in full screen. Press ESC to exit full screen.
NOTE: Go to Configuration → Local , click Save clips to to change the saving path of clipped
video files.
4. Click on the playback interface to download files.